Nonroadway collision with other vehicle, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Aloha Marine Lines, Inc., Pier 29, HONOLULU, HAWAII 96813
on — Fractures, affecting the neck, except internal location of diseases or disorders.
Final narrative
An employee was driving a golf cart on the pier when she was hit by another vehicle, causing her to fall out and fracture her neck. She was hospitalized.
HospitalizedNeck, except internal location of diseases or disordersGolf cart, personnel transport cart
An employee was removing 4-inch by 12-inch wooden tire chocks from a meat processor modular unit. A tire chock was thrown into an electric cart and landed on the gas pedal. The cart struck the employee and pinned him against the bottom frame of the modular unit. The employee was hospitalized for fractures of the ribs, shoulder, and vertebrae as well as a punctured lung.
An employee was driving a forklift when it collided with another forklift. The employee's middle finger was pinched between the two forklifts and partially amputated.
A temporary employee was operating a powered industrial truck and attempting to maneuver around another automated powered industrial truck when the vehicles collided. The employee sustained a crush injury to their right foot.
An employee was operating a double pallet jack down an aisle when he was struck by another double pallet jack. The employee's right lower leg was then caught between the pallet jack and a rack beam, resulting in an injury just above the right ankle that required hospitalization.
An employee was operating a ride-on double pallet jack when he was struck from behind by another pallet jack. Their lower right leg was caught resulting in fractures to the tibia and fibula.
More severe injuries in this industry (NAICS 488320)
While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.
An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.
An employee was on a 6-foot A-frame ladder, working to replace ceiling tiles. They fell to the ground and sustained fractures to their hip and femur. The employee was hospitalized and required surgery.
An employee was installing shoring and stepped on a 2x4 that was running across the top of a trench. He fell through and was hospitalized with a fractured left femur.
An employee was securing a ramp to a dock to unload cargo. He was using large pins to put the ramp in place when two of his fingers got caught in the ramp, resulting in a partial amputation.
An employee was helping to dismantle a mobile crawler crane. Employees were separating boom sections. When the last pin was hammered out, the 40-foot boom section dropped 4-5 inches onto the injured employee's left foot. All five toes were amputated and the employee was hospitalized for surgery.