Struck by powered vehicle-nontransport, n.e.c. · Fractures and other injuries, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at Aloha Marine Lines, Inc., 91-550 B Malakole Street, KAPOLEI, HAWAII 96707
on — Fractures and other injuries, n.e.c., affecting the multiple body parts, n.e.c..
Final narrative
An employee was removing 4-inch by 12-inch wooden tire chocks from a meat processor modular unit. A tire chock was thrown into an electric cart and landed on the gas pedal. The cart struck the employee and pinned him against the bottom frame of the modular unit. The employee was hospitalized for fractures of the ribs, shoulder, and vertebrae as well as a punctured lung.
HospitalizedMultiple body parts, n.e.c.Golf cart, personnel transport cart
An employee was driving a golf cart on the pier when she was hit by another vehicle, causing her to fall out and fracture her neck. She was hospitalized.
An employee was going to fill a pallet with items from the warehouse. He was reaching for the handle of the pallet jack but unintentionally grabbed the throttle, causing the pallet jack to move and pin him against another pallet jack. The employee sustained a leg fracture.
An employee was loading merchandise onto rolling containers that were on a remote-operated order picker. While reorganizing merchandise to prevent top loading, the employee's wireless control device contacted a container and caused the order picker to move forward. The employee's right ring finger was caught between two containers and was amputated above the first knuckle.
The injured employee was operating an elevator at a construction site. He went from the tenth floor to the eleventh floor with a plumber and a scissor lift in the elevator. The plumber was using a remote to operate the scissor lift. As the scissor lift was exiting the elevator, a pipe that was on the scissor lift struck the injured employee's chest. The employee was hospitalized.
An employee was dismantling the engine from a vehicle. The vehicle slid off the loader and struck the employee, pushing him into his toolbox. The employee sustained a broken jaw.
More severe injuries in this industry (NAICS 488320)
While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.
An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.
An employee was on a 6-foot A-frame ladder, working to replace ceiling tiles. They fell to the ground and sustained fractures to their hip and femur. The employee was hospitalized and required surgery.
An employee was installing shoring and stepped on a 2x4 that was running across the top of a trench. He fell through and was hospitalized with a fractured left femur.
An employee was securing a ramp to a dock to unload cargo. He was using large pins to put the ramp in place when two of his fingers got caught in the ramp, resulting in a partial amputation.
An employee was helping to dismantle a mobile crawler crane. Employees were separating boom sections. When the last pin was hammered out, the 40-foot boom section dropped 4-5 inches onto the injured employee's left foot. All five toes were amputated and the employee was hospitalized for surgery.