105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

ArcelorMittal LLC

Caught in running equipment or machinery during maintenance, cleaning · Amputations

Federal OSHA recorded a severe workplace injury at ArcelorMittal LLC, 100 Pennsylvania Avenue, WEIRTON, WEST VIRGINIA 26062 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..

On September 21, 2016, at approximately 7:30 a.m., an employee and two coworkers were conducting routine checks on the plating line when a piece of debris was noted riding on top of the running strip line/plating solution. The employee attempted to remove the debris from the running strip line with a 12-inch spud wrench when his right hand was pulled into the rotating plating rolls, amputating his index finger, breaking his ring finger, and causing an abrasion to his hand.

Amputation Finger(s), fingernail(s), n.e.c. Metal, woodworking, and special material machinery, n.e.c.

ArcelorMittal, LLC

An employee slipped and fell on a patch of ice, resulting in a fracture to his right radius and nerve damage.

ArcelorMittal, LLC

An employee was raising a pendant crane when the hook became caught on a spacer block and knocked the other blocks over. The blocks rolled to the floor and onto the employee's feet, fracturing both.

ArcelorMittal, LLC

On August 16, 2017, at 5:30 p.m., an employee was attempting to disconnect a crane magnet when an arc flash occurred. He was shocked, receiving a 4-inch burn on his right forearm, a burn in the middle of the right side of his back, and a burn on the top of his right foot. He was hospitalized.

ArcelorMittal, LLC

An employee was using an overhead chain lift to lift a 29-foot-long flat bar weighing 2900 lbs. when the hook holding the chain bent, allowing the flat bar to slip and amputate the employee's left middle and ring fingertips.

ArcelorMittal, LLC

An employee was walking from their car to the plant, slipped on the ice, and fell resulting in a broken knee cap.

View ArcelorMittal LLC's full OSHA safety record →

DGS Import, LLC

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

Millennium Mat Company

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Bauer Foundation Corp.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

Guggisberg Cheese, Inc.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

Alsco Inc.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Priefert Manufacturing

An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.

CF&I Steel L.P.

An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

Tampa Bay Steel, LLC

An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.

Caperton Furniture Works, LLC

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

Certainteed Gypsum West Virginia, Inc

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

Owens Corning

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

Applied Integrated Services, LLC

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

Fedex Freight Inc.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.