Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Smithfield Foods, Inc., 410 Kirk Road, SAINT CHARLES, ILLINOIS 60174
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
On October 22, 2016, an employee was pushing a stick cart. The employee had his left hand on top of the stick cart when he hit another stick cart. The wooden sticks came towards his hand amputating the distal part of his left middle finger.
An employee was operating a packaging machine and went to unjam some plastic. Her left hand contacted the cutting blades resulting in a partial amputation to the middle fingertip. A guard was in place at the time.
An employee was putting a pipe back together and was setting up equipment prior to start of production. The air valve was turned on and the employee's left thumb was partially amputated by the butterfly spindle inside the pipe.
An employee was replacing a roller on a belt press. They were pushing the roller when it fell out of alignment and crushed their left hand resulting in partial amputation of the little finger.
An employee was working in the prepack department in the chorizo area when a contractor performing work in the area cut into an anhydrous ammonia line. The employee inhaled ammonia gas, resulting in injury to the lungs and eyes. The employee was hospitalized.
An employee was working in the smoked meats department operating a machine that clips and holds the ham before smoking. A tote used to catch bindery emulsion from the machine was full and moved out from under the workstation. The employee later tripped over the tote and fell to the floor, sustaining a left femur fracture that required hospitalization and surgery.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 311991)
An employee was painting a wall. They fell down three steps and landed on a plastic mop bucket and the floor. The employee was hospitalized with fractures to their right arm and right hip, and required surgery.
An employee was using an electric jack to load a pallet onto a truck when he was struck from behind by a forklift, resulting in a laceration to his right leg.
An employee was performing maintenance on a tray packer. They put a piece of cardboard down onto the belt of the tray packer and stood on the belt. The belt started, causing the employee to lose balance and fall approximately 2 feet. The employee was hospitalized with a fractured ankle and required surgery.
An employee was adding cilantro to the dicing machine when it became jammed. While clearing the jam, the blade amputated approximately 1/2" to 3/4" of his right middle finger.
An employee was cleaning and sanitizing a mixer when the machine was activated. The employee's hand was caught in the machine and he sustained the amputation of his right hand. The employee was hospitalized.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.