GRAPHIC PACKAGING INTERNATIONAL, INC.

An employee was working with a pallet bagger, trimming excess corrugate off a tray. The load was raised on a lift table. The scrap being trimmed activated the lift table's photo eye, causing the table to lower. Its frame pinched the steel toe of the employee's left boot between a bracket and the concrete. The employee suffered fractures in the left foot and was hospitalized.

An employee was completing a quality check at the coating section of the paper machine. As the employee was clearing a coating buildup from the applicator roll, the employee's left hand was caught in a nip point between the applicator roll and coater roll and crushed.

While an employee was repairing a water condensate motor and pump, the grating covering an adjacent u-drain dislodged. This caused the employee's right leg to drop into hot water condensate resulting in a thermal burn to the lower right leg.

An employee was pushing a loaded pallet to the end of a conveyor at a press. The employee noticed a plastic pad lying in front of the pallet and was removing it when the pallet, still rolling, pinched the employee's right ring finger against the metal conveyor end stop amputating it.

On 10/10/2018, around 8:30 a.m., an employee was attempting to replace a motor on a press machine when the employee was pinned between the motor and the machine frame, suffering contusions that required hospitalization.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was resetting a slitter machine's counter when their left hand was crushed under two rotating score shafts. The employee sustained amputations to three fingers on their left hand.

An employee went to retrieve dunnage for a co-worker when his right hand became caught in the rollers on the box transfer conveyor. The employee sustained a partial amputation to his middle fingertip.

An employee was working in the converting area installing a glue tote, and became ill from the heat. The employee sustained heat exhaustion.

An employee was troubleshooting a mini-feeder. As the employee was tapping the rotating drive chain with an Allen wrench, the employee's right hand came into contact with the chain. The employee suffered partial amputations, lacerations, and fractures to the middle and ring fingers. The machine was unguarded at the time of the incident.

An employee was between two sections of a printer when they sustained amputations to three fingertips on their right hand from the running print rolls.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.