Caught in running equipment or machinery during maintenance, cleaning · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Twin Marquis, Inc., 7 Bushwick Place, BROOKLYN, NEW YORK 11206
on — Cuts, lacerations, affecting the hand(s), except finger(s).
Final narrative
An employee was cleaning an uncut noodle off the blade of a noodle-cutting machine when the blade cut the back of the employee's left hand, requiring surgery. The machine was running at the time of the incident.
HospitalizedHand(s), except finger(s)Food and beverage processing machinery-specialized, n.e.c.
An employee was operating a packaging machine when a package bag became misaligned in the machine. As he tried to fix the position of the bag, his left hand was caught by the sealer/cutter of the machine, resulting in the amputation of three fingertips.
An employee was cleaning a dough mixer machine when the mixer's spinning blade contacted his hand, causing a laceration and broken bones. The machine was in operation at the time of the incident.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333241)
On July 16, 2025, at 5:20 p.m., an employee in training was cleaning a machine that makes dough balls when the machine turned on and injured three fingers on his right hand, including a fingertip amputation on the middle finger.
An employee was feeding a roller into a pipe polishing machine when his glove was caught by the machine. The abrasive belt caused a 3-4" laceration to the top of his right wrist which exposed bone. The employee was hospitalized and required surgery.
An employee was cleaning a chicken neck skinning machine when they noticed chicken skin was stuck on a piece of the machinery. The employee removed the piece of excess skin and their left index finger got caught in the equipment, resulting in a fingertip amputation.
An employee was running diagnostics on a machine when he slipped on dust in the surrounding area. As he caught himself, his finger was caught between the machine's moving chain and sprocket. His right index fingertip was amputated.
On September 4, 2024, an employee was lifting a 4-inch x 4-inch wood post that was 16 feet long and weighed 50 pounds when they felt a pop in their abdomen. The employee was hospitalized.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.