Twin Marquis, Inc.

An employee was operating a packaging machine when a package bag became misaligned in the machine. As he tried to fix the position of the bag, his left hand was caught by the sealer/cutter of the machine, resulting in the amputation of three fingertips.

An employee was cleaning a dough mixer machine when the employee's left hand was caught and fractured between the machine's moving rollers.

An employee was cleaning an uncut noodle off the blade of a noodle-cutting machine when the blade cut the back of the employee's left hand, requiring surgery. The machine was running at the time of the incident.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee got off a work platform to move empty pallets off the platform and onto the floor while a forklift driver was operating directly across from them and putting pallets up on an opposite platform. The forklift struck the employee as he was bringing down a pallet horizontally. The employee was pinned between the forklift and pallet, causing traumatic rhabdomyolysis to the employee's upper left thigh. The employee was hospitalized.

An employee was operating a motorized tugger when he fell from the tugger to the floor. He was hospitalized with a brain bleed that required surgery and an injury to the left hand.

An employee was applying a hoist hook to the I-bolt on a die plate when their right ring fingertip became pinched between the hook swivel and the bolt, resulting in an amputation/avulsion.

An employee was using a magnet in the waste bin while cleaning the metal. The employee walked the magnet to the other side of the line, then placed the magnet on a metal surface which caught their hands between the metal and the magnet, resulting in amputation of the middle fingertip.

An employee was operating a food packaging line that places a shrink sleeve band over the top of a plastic bottle. The rollers on the equipment jammed and the machine stopped. As the employee went to pull the shrink wrap down, the knife was triggered and contacted the employee's left thumb resulting in a partial amputation.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.