105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Latham Pool Products, Inc.

Caught in running equipment or machinery, unspecified · Amputations

Federal OSHA recorded a severe workplace injury at Latham Pool Products, Inc., 605 SATELLITE BLVD NW, SUWANEE, GEORGIA 30024 on — Amputations, affecting the finger(s), fingernail(s), unspecified.

An employee was working on a die cut machine that manufactures metal caps when the machine amputated his right pointer finger.

Amputation Finger(s), fingernail(s), unspecified Metal, woodworking, and special material machinery, n.e.c.

Latham Pool Products, Inc.

An employee was putting on a work boot when a fiberglass splinter punctured the bottom of the employee's left foot. The employee was hospitalized for an infection.

Latham Pool Products, Inc.

An employee was being lowered on a forklift man basket when the hydraulic mechanism of the forklift pinched the employee's right pinky finger, amputating it at the top knuckle.

Latham Pool Products, Inc.

An employee was cutting a piece of poly-core sheeting with a chop saw when the employee's fingers contacted the blade. The employee suffered lacerations to the left thumb, index finger, and middle finger.

View Latham Pool Products, Inc.'s full OSHA safety record →

Service Wire Company

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

Oriental Trading Company, Inc.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

Fox Packaging

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

ITW Bedford Wire

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

Nan Ya Plastics Corporation USA

A subcontracted engineer was advising maintenance how to make a modification to the embossing roll system on a new line. Maintenance was bringing the motor and gearbox down with a crane. The load shifted when it was a few inches from the ground. The engineer went to catch/maneuver the gearbox and the fingers on his left hand were crushed between the I-beam base of the gearbox and the concrete floor. A finger was amputated.

Micro Plastics, Inc.

On July 30, 2025, an employee was assisting co-workers in using a hoist to position an injection molding tool onto a work table. As the tool was being lowered, the slide section shifted, trapping and amputating the employee's right thumb tip.

Novacel, Inc.

An employee was manually lifting a film roll when their right middle fingertip was pinched between the roll and a metal beam, resulting in a fingertip amputation.

3M Company

At about 10:00 a.m. on July 13, 2025, an employee was cleaning the adhesive from running rollers using a rag soaked in cleaning solvent to prevent contamination. The rag was caught between two rollers and pulled the employee's right hand between the rollers. The employee sustained right hand crushing injuries, de-gloving injuries (palmer and dorsal sides), and fractures. The employee was hospitalized and required surgery. The machine was not locked out/tagged out at the time.

Simona America Inc.

An employee working on a sheet line was removing masking from the underside of plastic sheeting that was being lifted by a vacuum lift. The plastic sheet measured 4 feet wide, 14 feet long, and approximately 1 inch thick, and it weighed approximately 300 pounds. The vacuum lost suction and dropped the plastic sheet onto the employee's arm, pinning it between two sheets and resulting in a broken right forearm.

GS II Building Products, Inc.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Alfa Insurance

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

EMORY UNIVERSITY HOSPITAL

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.