NAPA Auto Parts

On February 3, 2025, an employee tripped and fell backward on stairs. The employee fell down seven steps and sustained a head injury.

An employee was on a ladder putting away stock when a box fell. The employee went to catch the box and fell off the ladder. The employee sustained a broken ankle requiring hospitalization.

An employee tripped on an object and fell while delivering parts to a customer. The employee sustained fractures to three ribs.

An employee was walking back into the store after bringing auto parts to his vehicle for transportation. The employee tripped over the concrete barrier at the end of the parking space and sustained a knee fracture.

An employee delivered material to a customer's store and was leaving the location when they tripped over a box and fell, sustaining a hip fracture and a bump on their head.

An employee was stepping out of a car when they slipped and fell on ice, resulting in a femur fracture.

An employee was closing up for the weekend when they slipped on oil and brake fluid and fell. The employee suffered a leg fracture.

An employee was working in the forest flagging an area to be harvested. He took a step and his foot slipped on a stick hidden under the leaves, causing him to fall to the ground. He landed on his right foot/lower leg resulting in a fractured tibia.

An employee was inspecting an apartment to ensure it was ready for a new resident to move in. The carpet in the apartment had been recently cleaned and was still wet. As the employee went from the carpet to the tiled floor of the bathroom, they slipped and fell, resulting in a torn left hamstring.

An employee was delivering a letter along a rural carrier route when she stepped on an ice-covered snow drift, slipped, and fell to the ground. The employee sustained a right hip fracture that required surgery.

An employee was carrying a plastic tote full of brake rotors. His foot caught the corner of a pallet, causing him to fall to the concrete floor and break his hip.

An employee tripped on a rotor on the floor of a store, fell, and suffered a broken right thumb.

An employee was working on a vehicle in a bay. As he turned around, his foot caught on the leg of a lift and he heard/felt a snap and pop in his right hip and fell. The employee sustained a torn hamstring in his right leg.

An employee was installing a driveshaft on a customer's vehicle. He was using a floor jack to hold the driveshaft in place to line up the bolts. The driveshaft moved off the jack and crushed his left ring fingertip, resulting in an open fracture of the tuft of the distal phalanx, as well as a partial amputation.

An employee was in a truck, helping a team lift a 55-gallon drum into the truck. The employee fell to the ground and suffered a broken left arm. The employee was hospitalized and required surgery.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.