105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Allied Fitting LP

Struck by dislodged flying object, particle · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at Allied Fitting LP, 7200 Mykawa Road, HOUSTON, TEXAS 77033 on — Cuts, lacerations, affecting the thigh(s).

Watch Allied Fitting LP — free Get an email when a new federal OSHA severe-injury report for Allied Fitting LP is published. One employer, no account, unsubscribe in one click.

An employee was cutting carbon steel metal on a lathe machine. A metal shaving from the cut coiled up and fell into the tee, a fitting used to connect pipe. The material is on a rotating part. A portion of the metal shaving was pushed out of the tee and struck the employee's upper leg above the knee and lacerated it.

Hospitalized Thigh(s) Metal chips, particles

Allied Fitting LP

An employee was cutting metal banding. After being cut, the banding shot up and struck the employee's eye causing a corneal injury.

Allied Fitting LP

An employee was working on a Computer Numerical Control (CNC) machine when a part came loose inside the machine. The door of the machine stopped the part, but the door caused the employee to fall off the 15-inch platform and land on the ground. The employee suffered a broken collarbone, broken rib, and other injuries, requiring hospitalization.

View Allied Fitting LP's full OSHA safety record →

Lowe's Home Improvement

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

S & J Construction, LLC

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

RMVK Enterprise, INC.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

Dustrol Inc.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

WalMart #436

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

SLOAN VALVE COMPANY

An employee was troubleshooting a shell core machine that had failed to raise the sand hopper into place for core making. The employee went to manipulate a switch and the machine cycled. The employee s left middle fingertip was caught between the roller-ball switch and the roller-ball switch target, resulting in a laceration that required surgical amputation to part of the distal phalanx.

Rosenboom Machine & Tool Inc.

On August 18, 2025, at approximately 7:40 AM, an employee utilized a pocket knife to cut banding on a new bundle of rod material. The knife blade bent during use. The employee was working to straighten the blade on a hard surface when the knife slipped, causing a lacerating their right wrist/forearm. The employee was hospitalized.

ASC Engineered Solutions

An employee was manually pulling drive belts to rotate a machine that needed repair. The employee's right index finger was pinched between a rubber drive belt and a pulley, causing an amputation to the fingertip.

Ashland Water Group Inc.

At about 9:15 a.m. on May 14, 2025, an employee was using a bending press to bend metal into a U shape. The press caused an amputation to the employee's left middle finger.

Victaulic Company of America

An employee was running a test pipe for 12 feet and went to pull the pipe out of a roll grooving tool. As he was doing this, the tool's control pedal actuated, causing the tool to rotate. The employee's glove became caught and was pulled into the rollset, amputating about half an inch of his index finger.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.