105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Rosenboom Machine & Tool Inc.

Injured by object held or wielded by person · Cuts, lacerations, punctures without injury to internal structures

Federal OSHA recorded a severe workplace injury at Rosenboom Machine & Tool Inc., 1032 S. Maple St,, BOWLING GREEN, OHIO 43402 on — Cuts, lacerations, punctures without injury to internal structures, affecting the Wrist(s) and arm(s) n.e.c..

On August 18, 2025, at approximately 7:40 AM, an employee utilized a pocket knife to cut banding on a new bundle of rod material. The knife blade bent during use. The employee was working to straighten the blade on a hard surface when the knife slipped, causing a lacerating their right wrist/forearm. The employee was hospitalized.

Hospitalized Wrist(s) and arm(s) n.e.c. Knives

Rosenboom Machine & Tool, Inc.

On September 4, 2020, a welder operator was training a new employee on how to operate a robotic welder. The machine actuated while his left hand was in it, resulting in a partial amputation of the little finger.

Rosenboom Machine & Tool, Inc.

An employee was about to clamp a small part into a horizontal bandsaw when the hydraulic clamp smashed his fingers. He suffered partial amputations to his left index and middle fingers.

Rosenboom Machine & Tool Inc.

On or about 6/15/15, an employee operating pipe bender machine was caught in the machine and amputated his left middle fingertip.

View Rosenboom Machine & Tool Inc.'s full OSHA safety record →

Circle Graphics, Inc.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

Spellman High Voltage Electronics Corporation - Valhalla

An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.

CONTAINER GRAPHICS CORP

An employee was using a box cutter when it cut the tip of his left thumb resulting in a fingertip amputation.

Village Plumbing, Air & Electric

While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.

Rock Labor LLC

An employee was using the pipe-and-wrench method to loosen a seized bolt on a roof truss. A technician from another company was on the other side of the truss doing the same action with the same method. The employee's socket slipped off the bolt and his left hand was crushed against the truss, resulting in injuries to the index and little fingers, requiring hospitalization, surgery, and amputation of the index finger.

SLOAN VALVE COMPANY

An employee was troubleshooting a shell core machine that had failed to raise the sand hopper into place for core making. The employee went to manipulate a switch and the machine cycled. The employee s left middle fingertip was caught between the roller-ball switch and the roller-ball switch target, resulting in a laceration that required surgical amputation to part of the distal phalanx.

ASC Engineered Solutions

An employee was manually pulling drive belts to rotate a machine that needed repair. The employee's right index finger was pinched between a rubber drive belt and a pulley, causing an amputation to the fingertip.

Ashland Water Group Inc.

At about 9:15 a.m. on May 14, 2025, an employee was using a bending press to bend metal into a U shape. The press caused an amputation to the employee's left middle finger.

Victaulic Company of America

An employee was running a test pipe for 12 feet and went to pull the pipe out of a roll grooving tool. As he was doing this, the tool's control pedal actuated, causing the tool to rotate. The employee's glove became caught and was pulled into the rollset, amputating about half an inch of his index finger.

Ameriforge

A forklift was being used with a counterweight to punch out the wedge of a die. The forklift operator was working to adjust the counterweight when the forklift attachment bounced back. An employee's fingers were pinched between the forklift forks and the handle of the counterweight. The injured employee's left ring and middle fingertips were amputated.

United States Postal Service

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

Foundation Steel, LLC

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

GXO Logistics

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

Abbott Electric Inc

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

American Electric Power Company

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.