Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Darling Ingredients Inc. , 302 Rainbow Blvd. , NIAGARA FALLS, NEW YORK 14303
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was opening a security gate and attempting to release a bent locking mechanism when his right ring finger was caught in the mechanism, amputating his fingertip.
A driver just completed dumping the contents of his truck bed and the hides basket at their facility. The employee noticed that the hides basket door did not close completely after the dump bed was lowered with the exterior controls. The employee went to manually push the hides basket door closed when their hand was pinched between the door and body of the hides basket, resulting in a right ring fingertip amputation. The employee was hospitalized and required surgery.
On June 2, 2023, an employee was standing on the mezzanine around the pressure cookers when hot steam and 300-degree grease escaped from the ports. The employee sustained burns to 57% of their body.
An employee was on a catwalk pressure washing the inside of a feather dryer to prepare it for maintenance. The employee's knee pad slipped, causing him to lose his balance and move forward. The stream from the pressure washer contacted his left index finger, resulting in a laceration that required hospitalization.
An employee was cleaning a centrifuge when he dropped a pair of pliers. The pliers struck a valve containing hot water, causing it to it discharge and strike him in the face. The employee sustained second-degree burns to the nose and right cheek.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 311613)
A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.
An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.
An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.
An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.
As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.