Pellitteri Waste Systems, Inc.

Employee performing maintenance on a conveyor fell down an open chute about 10 feet and was hospitalized.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was operating the compaction levers on a truck when a motor vehicle crashed into the back of the stopped truck. The employee sustained fractured ribs and contusions.

A maintenance employee was moving a forklift from the loading dock when the forklift fell off the dock. The employee was struck by the overhead portion of the roll bar, injuring his right knee. He was hospitalized and underwent surgery.

An employee was collecting garbage when they suffered muscle cramping and were hospitalized due to dehydration.

An employee was climbing a truck-mounted ladder when the ladder broke, resulting in hospitalization with a fractured left leg.

An employee was standing on the driver side rear step of a trash truck while traveling down a road to collect residential trash. The employee went to signal the driver and slipped off the step while the truck was traveling 8-9 miles per hour. He fell 18 inches to the ground and was hospitalized with a fractured ankle that required surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.