Cambridge-Lee Industries, LLC.

An employee was operating equipment to cut a copper pipe (20 feet in length, 2 inches in diameter) when a jam occurred between the revolver assembly and the pinch roller assembly. He assessed the jam and determined that the copper pipe needed to be cut using a battery-powered reciprocating saw. He made two cuts on the pipe with the reciprocating saw. When the second cut was finished, kinetic energy stored within the pipe due to the jam released, and the pipe struck the employee's left hand. The employee's index fingertip was partially amputated before the first knuckle without bone loss.

An employee was operating a copper transfer conveyor to move a copper pipe (3-inch diameter, 34-foot length) when the pipe jammed on the conveyor lip. The employee manually cleared the jam. Once the pipe was unjammed, it began moving down the conveyor causing the employee to stumble backward and catch his right hand in the gear chain assembly, resulting in the amputation of his index, middle and ring fingertips without bone loss.

An employee was operating a copper push-point machine. The employee went to remove the die when their right gloved hand became stuck on the lip of the pointed copper. Their right middle finger moved into the die and was amputated at the first knuckle.

An employee was cleaning a set of pinch rollers. The employee's right hand and arm were pulled through the rollers and crushed. The machine was not shut down and locked out at the time of the incident.

An employee was impaled by copper tubing while walking between two machines on the copper tubing line.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee tried to catch a metal casting being laid down with chains by rigging equipment. The casting started to slip in the chains, causing the employee's left middle finger to be pinched by the chains and resulting in an amputation down to the first knuckle.

An employee was on a roof with contractors getting estimates for roof repairs. The employee fell through the roof, struck an air compressor during the fall, and landed on a wooden pallet and the concrete floor approximately 20 feet below. The employee sustained broken vertebrae and a punctured lung.

An employee was investigating the chain of a pallet jack that had hung up. The chain pulled tight and amputated the employee's left index fingertip.

An employee fell while walking in a warehouse, injuring his left hip.

On January 31, 2020, an employee was tearing down a die and emptying molten metal from a mold when the molten metal contacted the employee, burning his right leg and ankle. He was hospitalized.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.