Engineered Materials Solutions LLC

An employee amputated his left-hand ring and middle fingertips when his hand contacted a running fan belt.

An employee was winding the end of a roll. He was jogging the end of the material onto the roll when his right hand went between the hold-down device and the take-up reel. When he pulled his hand out, his fingertip was amputated.

An employee was transporting a patient to their residence. The employee bent down to grab a stretcher and felt a pop in their back. The employee sustained a herniation of their L4-L5 disc.

On November 18, 2023, at approximately 8:30 a.m., an employee was loading products onto a delivery truck. The employee lost footing and sustained a torn hamstring and a hematoma with nerve damage to his foot/leg.

An employee was carrying a pipe when it slipped from their hand. As they reached to grab it while it was falling, they felt a muscle pull. The employee was hospitalized for an abdominal hernia.

On August 21, 2023, an employee was reaching for product on the shelf in the cooler when their back gave out. The employee was hospitalized for an exacerbation of bulging disks.

An employee was vacuuming the inside of a used car when they sustained a lower back strain during the repetitive work, requiring hospitalization.

An employee was polishing a bar on the lathe with sandpaper when the bar wrapped around the employee's glove and pulled it off. The employee sustained fractures to their index finger, wrist, and a knuckle.

An employee was using an electrical meter to troubleshoot an electrical drive system. While removing the probe, the employee made contact with the bus and was shocked. The employee sustained burns to their fingers and a dislocated shoulder.

An employee was setting up a furnace and lighting the torch on the furnace when they sustained burns from a flashback flame. The employee was hospitalized with burns to their head, face, chest, arms, and armpit area.

An employee was using a metal bar tied to a nylon strap attached to a jib crane to tighten a metal ring on a heated extrusion press. The metal bar flew off and struck the employee in the left forearm, fracturing it.

An employee was troubleshooting the lift table of the automated take-up mechanism on the jacket extrusion line. He was able to get the table to raise up, at which point it engaged and lowered. The employee's leg was pinned between the lift table and the concrete floor. His ankle was broken and he was hospitalized, requiring surgery.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.