105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Cerro Flow Products, LLC

Caught, entangled in running powered equipment normal operation · Fractures

Federal OSHA recorded a severe workplace injury at Cerro Flow Products, LLC, 3000 Mississippi Avenue, EAST SAINT LOUIS, ILLINOIS 62206 on — Fractures , affecting the Hand(s) and wrist(s).

An employee was polishing a bar on the lathe with sandpaper when the bar wrapped around the employee's glove and pulled it off. The employee sustained fractures to their index finger, wrist, and a knuckle.

Hospitalized Hand(s) and wrist(s) Lathes

CERRO FLOW PRODUCTS LLC

An employee was working at the furnace conveyor line when the guard was knocked off the machine. The employee went to retrieve the metal guard and his right-hand fingers contacted the rotating chain, resulting in two fingertip amputations.

Cerro Flow Products, LLC

An employee was loading a baler. The baler jammed; as he tried to clear it, it crushed his right hand.

Cerro Flow Products LLC

An employee was loading copper tube into a draw bench machine. The copper was pulled forward by the machine and the employee's finger was pinched between the tube and the draw bench machine resulting in amputation of the left middle finger.

CERRO FLOW PRODUCTS, LLC

An employee had just finished a maintenance function on the de-burring machine and was in the process of starting it back up. The employee was then caught between the hopper and de-burring table, suffering a crushing injury to the upper left chest, including a fractured scapula and extensive bruising. The employee was hospitalized overnight. The machine was running at the time of the incident.

CERRO FLOW PRODUCTS, LLC

An employee was helping to adjust equipment. She tripped as she was walking around the equipment. When she reached out to catch her fall, her right hand entered the point of operation. The equipment activated, pinching and amputating her right pinky finger between the stockholder tab and discharge table.

View Cerro Flow Products, LLC's full OSHA safety record →

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Olympia Food Industries Inc.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

Day & Zimmermann Lone Star LLC

An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Galaxy Balloons Inc.

An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.

MUELLER COPPER TUBE CO., LLC

An employee was using an electrical meter to troubleshoot an electrical drive system. While removing the probe, the employee made contact with the bus and was shocked. The employee sustained burns to their fingers and a dislocated shoulder.

Revere Copper Products, Inc.

An employee was setting up a furnace and lighting the torch on the furnace when they sustained burns from a flashback flame. The employee was hospitalized with burns to their head, face, chest, arms, and armpit area.

Wieland Chase LLC

An employee was using a metal bar tied to a nylon strap attached to a jib crane to tighten a metal ring on a heated extrusion press. The metal bar flew off and struck the employee in the left forearm, fracturing it.

Republic Wire, Inc.

An employee was troubleshooting the lift table of the automated take-up mechanism on the jacket extrusion line. He was able to get the table to raise up, at which point it engaged and lowered. The employee's leg was pinned between the lift table and the concrete floor. His ankle was broken and he was hospitalized, requiring surgery.

Fisk Alloy Inc

An employee was fixing a tangled wire from a multi-block machine when their finger got caught. In removing their finger, they sustained an amputation to their right middle finger (first knuckle).

Takeda Pharmaceuticals U.S.A., Inc.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

Great Dane Ltd. Partnership

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

Olympia Food Industries Inc.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

AbbVie Inc.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

TSA Processing - Montgomery

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.