Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Philips, 1740 Golden Mile Highway, MONROEVILLE, PENNSYLVANIA 15146
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was testing a new matrix for respiratory care when a valve closed on the employee's right middle finger, amputating the fingertip.
AmputationFingertip(s)Medical, surgical, x-ray machinery and equipment, unspecified
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 541712)
A temporary employee climbed onto a 28-inch high table to clean the top of the head assembly of the profile saw used to cut polyurethane foam. While cleaning, he tripped over the pneumatic hose and struck the blade. He then fell over to the other side of the head assembly onto the table. The employee sustained an amputated right foot and a laceration on his left leg. The machine was not locked out/tagged out and guarding was not used at the time.
An employee was sitting in an office chair when his foot caught on one of the rollers. He fell from the chair to the floor and suffered a broken hip. He was hospitalized.
An employee was disconnecting a resistor in an electrical test setup and contacted an energized power terminal. The employee suffered an electric shock and was hospitalized.
An employee was walking down the hallway when they tripped over a raised concrete slab on the floor and fell. They sustained a right elbow fracture that required hospitalization.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.