105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

ULTRA-POLY CORPORATION

Caught in running equipment or machinery, unspecified · Amputations

Federal OSHA recorded a severe workplace injury at ULTRA-POLY CORPORATION, 102 DEMI RD., PORTLAND, PENNSYLVANIA 18351 on — Amputations, affecting the fingertip(s).

An employee was working on an extruder when his glove became caught in the machine. The extruder then pulled his hand in and amputated a fingertip. The machine was not locked out at the time.

Hospitalized Amputation Fingertip(s) Extruding machinery

Ultra-Poly Corporation

An employee was dislodging a piece of foam board from between the production line cage and the conveyor belt. Once the piece was unstuck, it fell into the production line, struck the rotor, and then shot back up. His thumb was then wedged between the plastic and the conveyor, resulting in a partial medical amputation.

Ultra-Poly Corporation

At about 3:45 p.m. on July 12, 2018, an employee was replacing seals on a plastic extrusion machine. As the employee was installing a pin to connect the screen change plate to the hydraulic cylinder, the cylinder actuated causing the shaft to move outwards and crush his fingers against the extruder. One finger was amputated.

Ultra-Poly Corporation

An employee was working in the electric panel of a rotor machine when an arc flash occurred. The employee received burns on both arms and the face. The electric power was not locked out at the time of the incident.

View ULTRA-POLY CORPORATION's full OSHA safety record →

Service Wire Company

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

Oriental Trading Company, Inc.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

Fox Packaging

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

ITW Bedford Wire

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

General Polymeric Corporation

An employee was monitoring a rotary press when his left hand became caught in the machinery. The employee's left middle finger was amputated at the distal interphalangeal joint.

MCM Plastics, Inc.

An employee was sweeping in an area with powdered PVC on the floor and began having difficulty breathing and coughing up blood, The employee was hospitalized for inhalation of PVC.

Lawter Inc.

An employee was working on a pastillator machine, which processes resin-based materials into solid pastilles. His right hand became caught between the feed roller (operating at approximately 350 F) and the cooling belt. The employee s glove and shirt sleeve adhered to his arm due to the heat. The employee sustained third-degree burns to his right hand and forearm, requiring hospitalization and surgery.

AdvanSix, Inc.

An employee was troubleshooting a leak on a low pressure (less than 50 PSI) condensate line in the oxidation area of the plant. He was working to remove insulation around a valve when either the valve or the line failed, and hot condensate contacted his right arm, right abdomen area, and the front of both legs, resulting in second- and third-degree burns.

Rochling Machined Plastics

An employee was replacing a fan on a cooling unit. As he went to adjust a pump, the unit caught his right hand and the fan blades severely lacerated his index finger. He underwent a medical amputation to the finger.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.