Topre America Corporation

An employee was at a turn table, part of a press system. A die fell off the table and crushed the employee's right leg. The leg was amputated.

An employee was operating a stationary projection welder when a nut misfed onto the part. The employee went to move the misfed nut. The ram on the welder actuated and the employee's left index finger was pinched between the ram and the electrode. The finger was amputated to the first knuckle.

A forklift struck an employee with its back end during a 180-degree turn. The employee suffered a fracture and muscle damage.

An employee was using a remote-operated overhead crane to pick up a stamping die. The crane cables caught the cleat of a die as the employee was moving the crane to pick up another die. The die fell and crushed the employee's right foot.

An employee was using a projection welder to weld a nut onto a metal part when its electrodes amputated his left index fingertip.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

An employee was winding a bobbin on a bobbin-winding machine when the string became entangled. While the employee was untangling it with scissors, the string caught her finger, wrapped around it tightly, and amputated it at the first joint. The machine was guarded at the time.

An employee was operating an electric pallet jack in a warehouse. As he turned out of one aisle into another, he had to reverse to get a better angle. While reversing, the pallet jack struck a metal guardrail and trapped the employee's right ankle against it. The employee's foot was broken.

An employee was checking for material flow in a screw conveyor within a material sampling port when the conveyor flight came into contact with their right hand, resulting in lacerations to their index, middle, and ring fingers.

An employee was helping to transport plastic material when their left foot was caught in the fabric cutter machine and sustained amputations to their big toe, 2nd toe, and 3rd toe. The employee was hospitalized.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.