UNFI

An employee was on a double-end rider in an aisle selecting product when his left leg was pinned between the rack and rider.

On May 29, 2023, an employee was making a 180-degree turn to align his forklift with the motion sensor on the door of the perishable warehouse. Their forklift struck another stationary forklift and the employee's left ankle was punctured by the raised forks of the stationary forklift.

An employee was stepping up onto a loading dock when he lost his balance and fell backward to the ground, resulting in a lower back injury.

An employee was operating a stand-up pallet jack and crushed their ankle between the pallet jack and a steel racking vertical post. The employee was hospitalized for surgery.

After moving a box from one pallet to another, an employee turned to walk away; her foot caught in wrapping on a pallet and she fell, suffering a broken hip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

An employee was winding a bobbin on a bobbin-winding machine when the string became entangled. While the employee was untangling it with scissors, the string caught her finger, wrapped around it tightly, and amputated it at the first joint. The machine was guarded at the time.

An employee was checking for material flow in a screw conveyor within a material sampling port when the conveyor flight came into contact with their right hand, resulting in lacerations to their index, middle, and ring fingers.

An employee was helping to transport plastic material when their left foot was caught in the fabric cutter machine and sustained amputations to their big toe, 2nd toe, and 3rd toe. The employee was hospitalized.

An employee was cleaning hoppers when they noticed buildup in the dust cyclone. The employee went to clear the buildup when their fingers were caught on the dust cyclone's air lock, resulting in partial amputations.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.