Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at JSW STEEL USA, Inc., 5200 E. MCKINNEY, BAYTOWN, TEXAS 77523
on — Amputations, affecting the fingertip(s).
Final narrative
On May 18, 2017, at approximately 2:30 PM, an employee swung open a machine door to allow a pipe to roll into the machine. His left index fingertip was pinched in the door hinge and had to be amputated.
AmputationFingertip(s)Metal, woodworking, and special material machinery, unspecified
While loading a truck, an employee grabbed the crane hook to make adjustments. The crane operator started to move the hook while the employee's right hand was still on the hook, crushing their fingers between the hook and the load. The employee sustained partial amputations of the right middle and ring fingers.
An employee was conducting a knife change on a mechanical shear when a holder from a cassette slid down, compressing the employee between the machine housing and the cassette holder. They sustained fractures to the pelvis and right leg as well as a partially collapsed lung.
An employee was positioning a piece of steel in a band saw's pneumatically powered clamp mechanism to hold the sample for cutting when his right thumb distal tip was caught in the clamp. He suffered a partial amputation of the thumb tissue under the nail.
An employee was operating a forklift when its hydraulic hose became bound. While the employee was trying to remove the hose, the forklift's mast chain moved, causing an amputation to the employee's left thumb to the first joint.
The employee was bending a piece of 3/4" diameter round bar in a vice and utilizing a 3" length of pipe over the bar for leverage. The pipe slipped off causing the employee to lose balance. As a result, the employee fell to the ground and pinched their left index finger between the length of pipe and their body causing a fracture.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331210)
An employee was cutting wooden boards using a table saw when the glove on his left hand was caught by the blade, resulting in a partial fingertip amputation.
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
A crane was hoisting a pipe. An employee was adjusting twisted lifting chains on the end of the pipe when the pipe was raised, causing the employee's hands to be caught between the chains and the pipe. The employee suffered injuries to the left index finger, left ring finger, right ring finger, and right index finger; the right index fingertip was amputated without bone loss.
During a routine inspection, an employee placed their hand on a pipe to check a weld. The pipe clamp activated, closed on the pipe, and trapped the employee's right middle finger, resulting in a partial amputation and fracture to the fingertip as well as a laceration to the ring finger.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.