T & T MILLWRIGHT INC.

An employee was removing a re-framed wall stud section on the fourth level of a building. He stepped backward and fell 40 feet down a grease chute to the concrete floor. The employee was hospitalized with swelling and bleeding above his right eye and internal injury to the pancreas.

An employee was walking on a walkway when they fell three stories through an open hole to the ground below. The employee sustained four rib fractures.

On 1/06/2023, an employee was on the fourth floor flat roof of an apartment building construction worksite. The employee was cleaning up nails and trash and putting them in a trash bag. The employee fell through a hole on the fourth floor and landed on the concrete floor of the first floor. The employee sustained a broken right ankle and required back surgery.

An employee was putting a tarp over a leak in a concrete roof. The employee fell through the roof to the floor 32.5 feet below, suffering a broken collarbone and leg, as well as a spinal injury that required a pin.

An employee fell through a floor hole cover on the third level of a building, landing on the concrete floor of the basement and suffering head trauma.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.

An employee tripped while stepping over a hose, fell on the ground, and dislocated his shoulder. He was hospitalized.

An employee was assisting with cutting a vertical steel pile. A 16-foot by 9-inch section of pile dropped to the side and bounced off a previously cut pile and toward the employee. The employee was struck in the torso and leg, causing his knee to dislocate from his femur. The employee was hospitalized.

On July 30, 2025, an employee was utilizing a circular saw to cut plastic into strips that would be used as shims. The blade of the saw amputated his left little finger to the second knuckle.

An employee was working on the ingot loader of a aluminum processing machine and noticed a pin was not installed. The employee reached to retrieve the pin and the machine activated for a functions test. The machine closed on the employee's hand, resulting in a hand injury requiring hospitalization.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.