105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

AMERICAN EXCELSIOR COMPANY

Caught in running equipment or machinery, unspecified · Amputations

Federal OSHA recorded a severe workplace injury at AMERICAN EXCELSIOR COMPANY, 831 PIONEER AVE., RICE LAKE, WISCONSIN 54868 on — Amputations, affecting the fingertip(s).

An employee was changing the blades on a machine and using a knee switch to hold open the pocket where the blades were located. The employee's knee slipped off the switch, allowing the blades to amputated the employee's right ring fingertip.

Amputation Fingertip(s) Metal, woodworking, and special material machinery, n.e.c.

American Excelsior Company

On August 8, 2024, an employee was using a pad machine to produce "highway rolls" (16-foot-wide wood blanket). He was trying to adjust a blanket that was not feeding into the machine's baler when the netting of the blanket caught his right hand. His right arm was pulled into the baler and was broken and lacerated. He was hospitalized. Machine guarding was found to be insufficient.

American Excelsior Company

A temporary employee attempted to retriever a push stick from inside a baler when the baler cycled and partially amputated a finger.

American Excelsior Company

On April 24, 2018, an employee was attempting to unjam a blanket machine when another employee operated the machine, which then lowered a metal bar on the first employee's arm. The employee's arm was crushed.

AMERICAN EXCELSIOR COMPANY

An employee was preparing to change knives on a wood cutting machine when the moving plate struck the guard that had the knife block resting on top of it. The movement of the plate launched the knife block into the air. The block then struck the employee, causing facial injuries and broken teeth.

View AMERICAN EXCELSIOR COMPANY's full OSHA safety record →

Service Wire Company

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

Oriental Trading Company, Inc.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

Fox Packaging

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

ITW Bedford Wire

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

North State Industries, Inc.

An employee was operating a saw when their right hand contacted the blade(s), resulting in amputation of four fingers and a partial thumb amputation.

Lignetics of Maine, LLC

An employee was using a telehandler to move pallets of pellets from a pod. The employee exited the telehandler to pick up a sacrificial pallet that is placed under the bottom layer of pallets. When the employee turned to pull the pallet away, the top two tiers of the pod fell on him. The employee sustained a fractured ankle, three fractured ribs, and fractured vertebrae.

K. W. McAvoy & Son, Inc.

An employee was loading a piece of wood onto a machine when the wood came out from under the guard and struck their arm, resulting in a fractured arm.

Enviva, LLC

An employee was preparing to replace a belt on a fan drive assembly. He went to manually stop the fan and was caught by the belt. His hand was pulled into the machine and his left little fingertip was amputated.

Hunt Forest Products L.L.C.

An employee was cutting remanufactured lumber with a chainsaw when a board fell and struck his left hand, causing his left hand to move off the chainsaw. While he was moving his hand back, the chainsaw kicked back and lacerated the top of his left hand. The employee was hospitalized.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.