Struck by object or equipment rolling freely · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Richardson Stevedoring and Logistics, 8500 Clinton Dr., HOUSTON, TEXAS 77029
on — Fractures, affecting the ankle(s).
Watch Richardson Stevedoring and Logistics — freeGet an email when a new federal OSHA severe-injury report for Richardson Stevedoring and Logistics is published. One employer, no account, unsubscribe in one click.
Final narrative
Two employees were breaking out pipe for loading and transport at a shipyard dock. One of the breakout straps broke, causing the pipes to roll and strike the employees' legs. The first employee suffered a broken right ankle, and the second employee suffered a contusion on the left leg and a bruised right leg. They were both hospitalized for treatment.
A load of steel pipes was being lowered into a barge. The employee attempted to direct the load of steel pipes and his right arm and hand were pinned between the barge and the steel pipes. He sustained multiple fractures.
A vessel was being unloaded with steel pipe. A forklift was coming in to pick up material to be put into a truck. An employee was inspecting the load that was to go into the truck. As he was looking at his check sheet, the forklift operator made a 90-degree turn and backed into him, injuring his right leg and foot.
An employee was connecting a dolly to a trailer. The equipment rolled away, causing the employee's left index finger to be crushed between the trailer and the dolly. The employee sustained amputation of the fingertip.
On October 17, 2023, at 9:55 p.m., an employee was working on a ramp while moving merchandise from a cargo loader to a dolly. The employee was putting the locks on the dolly and transferring a unit load device containing packages when she realized the lock was in the down position. As she attempted to fix the lock, the unit load device started moving toward the dolly, and the employee became wedged between the dolly and the device. The employee suffered an injury to her lower left leg.
Two employees were shaking out steel beams and standing them vertically. One beam was hit, causing the other beams to fall. A beam then rolled over an employee's left shin and fractured it. The employee was hospitalized and required surgery.
More severe injuries in this industry (NAICS 488320)
While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.
An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.
An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.