105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

ArcelorMittal Weirton LLC

Fall through surface or existing opening, unspecified · Soreness, pain, hurt-nonspecified injury

Federal OSHA recorded a severe workplace injury at ArcelorMittal Weirton LLC, 100 Pennsylvania Avenue, WEIRTON, WEST VIRGINIA 26062 on — Soreness, pain, hurt-nonspecified injury, affecting the ankle(s).

An employee was performing preventative maintenance on a loop car while standing on grating. As he was checking the wheels of the loop car, the grating gave way and he fell through the opening to the next level below, injuring his ankle. He was hospitalized.

Hospitalized Ankle(s) Grates and drains in floor surface

ArcelorMittal-Weirton, LLC

An employee was using a piece of I-beam to pound out a piece of scrap metal from a mandrel when his hand got caught between the I-beam and the scrap metal, leading to a cut and a smashed hand.

ArcelorMittal Weirton, LLC

An employee was using a 60-foot long pole to knock a piece of steel scrap loose from the heating section of a continuous annealer after a strip break when a refractory brick came loose and fell, striking the employee's hard hat and causing a concussion. A second employee sustained a head contusion when the fragmented refractory brick bounced off the first employee's hard hat and struck him in the head. The first employee was hospitalized.

ArcelorMittal Weirton, LLC

An employee was searching for scrap debris behind tailing rolls. The employee was descending a step at the tension reel area towards the coil car when his heel slipped, causing him to fall into the coil car, striking his rib cage. He sustained three broken ribs and a contusion on the side.

ArcelorMittal Weirton, LLC

An employee was standing near a base cover while it was being lowered by crane. The employee noticed damage on the cover and started to spin it to access the part that needed repairs. The crane operator was not aware of the employee and continued to lower the cover. The employee's fingers were caught between the cover and the crane, amputating the left fourth finger mid-nailbed and the third fingertip.

ArcelorMittal Weirton LLC

An employee fell 37 inches off a fixed ladder when the last rung shifted and landed on the grating below. The employee suffered fractured ribs and a collapsed lung.

View ArcelorMittal Weirton LLC's full OSHA safety record →

Scott Manufacturing, Inc.

An employee was power washing a metal tank from an elevated platform. They fell through a gap between the platform and the tank. The employee landed on the ground and sustained fractures to their ankles and feet.

Tamiami Builders Inc.

An employee was installing a metal roof when he stepped on a skylight. The employee fell through the skylight to the ground, resulting in head and shoulder fractures.

Air Source America, LLC

An employee was replacing an HVAC unit in a residential home. While he was in the attic space above the garage, the wood he was walking on broke, causing the employee to fall through the sheetrock to the concrete floor below. The employee bumped his head and sustained a shoulder injury as well as a broken ankle.

Russell Landscape Partners, LLC

An employee was putting a tarp on a water tank while standing on a trailer. She lost her footing and fell through the trailer bed, striking the corner of the trailer bed. The employee sustained internal bleeding.

BELFOR Property Restoration

An employee was repairing a sub-floor in a residential house that had water and fire damage. The employee fell through the sub-floor and landed in the basement, resulting in spinal fractures that required hospitalization.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Priefert Manufacturing

An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.

CF&I Steel L.P.

An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

Tampa Bay Steel, LLC

An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.

Caperton Furniture Works, LLC

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

Certainteed Gypsum West Virginia, Inc

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

Owens Corning

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

Applied Integrated Services, LLC

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

Fedex Freight Inc.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.