Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at OK Foods, Inc, 200 Industrial Rd, HEAVENER, OKLAHOMA 74937
on — Amputations, affecting the fingertip(s).
Final narrative
While trying to remove a piece of fat, an employee had their fingers caught in the de-fatter machine, resulting in amputation of the index fingertip and the middle fingertip on the left hand.
An employee opened the hatch of a meat processing machine for maintenance to remove product from underneath the machine. The hatch bumped and smashed the employee's left ring fingertip between the machine and the hatch, resulting in an amputation to the tip of the nail.
An employee was winching cages down to a drop-deck live-haul trailer. The terminal tractor moved in reverse and the employee was pinned between the fifth wheel and the trailer kingpin area. The employee suffered multiple fractures and lacerations.
An employee was using a powered pallet jack to move product. The stabilizer/drive wheel lost contact with the floor. When the wheel caught traction, the employee's lower right leg was pinned between the jack and the wall. The employee suffered a compound fracture to the lower leg.
An employee was moving a tote of chicken when their right thumb and index finger were pinched by the belt drive on the shaker table resulting in a partial amputation.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was working on removing the gearbox from the drive shaft of the motor assembly of a feather drier. He was using a hydraulic tool to pull the pieces apart when a bolt dislodged from the eye of the gearbox and the corner of the gearbox broke off. The employee was struck in the nose (sinus cavity), resulting in hospitalization and surgery.
An employee was on a forklift checking the sprinkler system drain. The employee fell 8 feet from the forklift to the floor. The employee suffered a broken collar bone and was hospitalized.
An employee was working as a dumper on a packaging line. A passing forklift turned and pinned the employee against a guardrail. The employee suffered fractures to their ribs and a leg requiring hospitalization.
An employee was cleaning an upper mezzanine. When he leaned against the mezzanine gate, he fell through the gate opening and landed 11 feet below. The employee sustained fractured orbital bones.
An employee was assigned to clean a feed mill in the basement. He then rode a tool and material basket to return from the basement to the ground level. He fell out of the basket and landed about 5 feet below. The employee sustained fractures to his arm, lower back, and foot.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.