Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at ZL Plastics, 10908 Strang Line Rd, LENEXA, KANSAS 66215
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was attempting to clean the head of a router machine when the blade amputated his left index finger and broke his left middle and ring fingers. The machine was running at the time.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326121)
An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.
At the maintenance shop, an employee was drilling plastic parts using a drill press. The employee's left glove got caught in the drill, and half of her left ring finger and her left little fingertip were amputated.
A maintenance technician was servicing an extruder and removed the cam locking pin on a hot water/steam line to change a water hose. Hot water/steam sprayed out, striking the employee on the right forearm and the right side of their neck. The employee sustained burns to their neck, right forearm, and right leg.
An employee was entering an area while carrying a tray containing 20 pounds of product. A plastic curtain came into contact with the employee's shoulder; the employee suffered a herniated disc while dislodging the curtain.
An employee was working on a cutting line that utilized a machine to pull material through the line. The employee was turning a roller to feed material into the machine when their left hand was caught between the rollers, resulting in abrasions and a dislocated thumb. The employee was hospitalized and required surgery on the thumb.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.