Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Paragon Industries, Inc., 3378 W. Highway 117, SAPULPA, OKLAHOMA 74066
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was on a roller conveyor attempting to replace a chain on a sprocket to get a pipe to move. Another pipe was placed on the conveyor, causing the sprocket to move. Both of the employee's hands were then caught in the sprocket, amputating the left index finger at the first knuckle and the left middle fingertip.
An employee was entering a concrete pit by stepping down onto a 55-gallon drum in the pit. He slipped and fell, and his lower abdomen struck the edge of the drum; his upper body then fell toward the other side of the drum. He suffered internal crushing injuries to the abdomen, as well as a laceration to the lower lip.
An employee was standing between two conveyors, checking the steel pipes on one of the conveyors. The conveyors activated and caused the pipes to move, resulting in crush injuries to the employee's chest.
An employee was using a crowbar to align steel on a machine when the crowbar slipped and smashed the employee's left index finger between the crowbar and the drum of the machine, resulting in amputation of the fingertip.
Maintenance was being performed on a production line. An employee grabbed a belt on a motor pulley system with his left hand. The pulley system pulled in his hand, causing partial amputations to the little finger, ring finger, and thumb.
An employee was in a pipe rack area. A pipe rolled and struck him in the back of the head. It pushed his head into another pipe, which crushed his face. He suffered fractures to the jaw bone, left eye socket, and facial bones, as well as a slight skull injury.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 331210)
An employee was cutting wooden boards using a table saw when the glove on his left hand was caught by the blade, resulting in a partial fingertip amputation.
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
A crane was hoisting a pipe. An employee was adjusting twisted lifting chains on the end of the pipe when the pipe was raised, causing the employee's hands to be caught between the chains and the pipe. The employee suffered injuries to the left index finger, left ring finger, right ring finger, and right index finger; the right index fingertip was amputated without bone loss.
During a routine inspection, an employee placed their hand on a pipe to check a weld. The pipe clamp activated, closed on the pipe, and trapped the employee's right middle finger, resulting in a partial amputation and fracture to the fingertip as well as a laceration to the ring finger.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.