Rainbow Cycle and Marine, Inc.

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was repairing and testing a side-by-side utility terrain vehicle. The vehicle rolled over, and the employee suffered two broken ribs.

An employee was lying on the ground behind the drop axel of a semi-truck while checking the brake chambers when the drop axel lowered due to the engine shutting off. The axel struck the injured employee and pinned them against the floor, resulting in broken ribs and a swollen eye.

An employee was ejected from a golf cart that flipped over while going up an incline. The employee was hospitalized for pelvic fractures.

An employee was on a ladder removing a pin that was stuck on a garage door when the door released and knocked them off of the ladder, causing them to fall 10 feet. They sustained fractures to two ribs, a scapula, and their skull.

A fuel truck operator was crawling under a fuel truck to put down an absorbent pad, due to a fuel leak. The employee was caught in a rotating shaft under the truck and sustained a broken ribs, a fractured vertebra, and a right shoulder injury.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.