Injured by slipping or swinging object held by injured worker · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Vimco, Inc., 300 Hansen Access Rd., KING OF PRUSSIA, PENNSYLVANIA 19406
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was using a 4.5-inch handheld grinder to grind a concrete form when the employee's right glove was caught in the grinder. The employee suffered a laceration involving a tiny portion of flesh that was amputated from the right pinky finger.
An employee was spooling new wire into a road mesh machine when his hand got caught in part of the machine and the reverse button on the machine was pressed. The employee suffered a fingertip amputation.
An employee was threading wire into a wire drawing machine when his finger slipped as the machine was pulling the wire, resulting in a partial amputation of the left ring finger.
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 331222)
An employee was changing a section of pipe on a sulfuric acid tank when the pipe broke and acid splashed onto the left side of the employee's body, resulting in chemical burns to their left shoulder, the back of his arm, and his leg.
On August 1, 2025, at approximately 5:05 AM, an employee was applying a label to a spool of product on a crane when the employee s arm became caught between two points of the crane. The employee was hospitalized with a degloving/avulsion injury to their right arm.
An employee was making an adjustment to a machine when his finger got caught in the machine. He sustained a partial amputation to the fifth finger on his left hand.
An employee was working on a wire drawing machine when three fingers on their right hand were caught between the rolls with the wire intact. The employee sustained an amputation to the middle and ring fingers and was hospitalized.
An employee was working at a threader machine. A spindle caught her sweatshirt. She was pulled into the machine, which pulled off her hooded sweatshirt and pulled in her hair. She suffered a scalping and was hospitalized.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.