Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Radio Frequency Systems, Inc., 200 Pondview Drive, MERIDEN, CONNECTICUT 06450
on — Fractures, affecting the leg(s), unspecified.
Final narrative
An employee was attempting to move an extrusion head weighing several hundred pounds off a work table to a transfer cart when the extrusion head fell onto his leg, breaking it.
HospitalizedLeg(s), unspecifiedMachine and appliance parts, n.e.c.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 334220)
An employee was running power into a conference room to install a new television while standing on the fourth rung of a ladder. The employee touched an exposed wire while looking at the junction and was shocked. The shock caused the employee to fall from the ladder. They sustained a concussion, a fractured collarbone, a brain bleed, and shock burns.
An employee was using a stand-up forklift to load a semi-trailer. The truck pulled away from the dock as the employee was driving onto the trailer to load it, causing the employee and the forklift to fall to the ground below and fracture their right leg.
An employee was on a service call to install cable wiring. While working on a ladder that was leaning against a strand line, the strand line broke causing the employee to fall approximately 18 feet to the ground below. The employee sustained two fractures to the right arm, a fracture to the left arm, and a fractured pelvis.
An employee was moving conveyors in a warehouse to another location using rolling casters. The legs became detached from the bottom of the conveyor, and the employee's right index finger was caught in the conveyor pinch point, resulting in a fingertip amputation.
An employee was working at her desk in the computer lab. When she stood up, her legs buckled, causing her to fall to the ground. The employee sustained a broken hip that required hospitalization.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.