Geo Tech Environmental Equipment

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was removing product (a transformer radiator weighing approximately 2,640 pounds) from the paint room utilizing an overhead drop-crane system. The employee inspected the product in the drop section and started to lower the load. The product fell out of the rigging and hit the ground. It then tipped, pinning the employee against a desk. The employee was hospitalized with collapsed lungs, a dislocated sternum, a head injury requiring staples, and fractures to their ribs and wrists/lower arms.

An employee was retrieving an empty blue bin. When he turned around, he tripped over a skid and fell to the floor, striking his head and sustaining injuries to his hip and foot. The employee was hospitalized with a fractured left hip.

An employee was buffing a part on a buffing machine when their glove was caught by the rotating spindle, resulting in lacerations to their arm.

An employee was troubleshooting a cutter machine to see why the blade was not spinning. The power button on the machine was pressed and the blade contacted his right little finger, resulting in a laceration and an amputation. The machine was energized at the time of the incident.

An employee was operating a horizontal press. As the employee reached for their work badge, the press cycled onto their little finger and amputated a quarter-inch of the tip.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.