Targa Badlands, LLC

An employee was performing oversight for the welding of a pipeline launcher door on a construction project. Two welders were performing arc welding, one on the interior diameter of the pipeline launcher door, and the other on the outside diameter of the launcher door when a flash fire occurred. The injured employee sustained first- and second-degree burns to the face, neck, back, and hands.

While on a scissor lift, an employee was grinding a steel pipe. Sparks from the grinder ignited some nearby rags that had been used to apply coating treatments to the pipe. This fire subsequently ignited the employee's clothing. The employee sustained burns to approximately 46% of their body and was hospitalized.

An employee was working in an area where another company was also working. The other company's employees were using an electric hydraulic pump to remove the bolts of the frac valve. The wiring of the torque wrench and pump unit were then charred and a flash fire occurred. The employee sustained second-degree burns to their face and neck.

On October 17, 2023, an employee was at a sink while using a solvent to unclog a vacuum trap dip tube that contained solids from pinacolborane distillation. During this process, the sink caught on fire and the solvent bottle containing tert-butyl methyl ether fell into the burning sink. The employee attempted to remove the solvent bottle which also caught on fire and suffered burns to their neck and left hand.

An employee was under a railcar cleaning up dust with a vacuum hose. The hose caused a spark that caused a flash fire that ignited the employee's clothing. The employee sustained second- and third-degree burns over 83% of his body.

An employee was unloading 10-foot sections of 6- to 8-inch pipe when their right ring finger was pinched between the pipe and pipe rack edge, resulting in a fingertip amputation at the first knuckle.

An employee was at a residential home to perform a gas houseline inspection after repairs. While using a flashlight to see, the employee walked into the laundry room and fell into a 2' x 2' access opening for a crawl space in the floor. A black rug was partially covering the opening. The employee fell approximately 40 inches into the crawl space. The employee sustained three fractured ribs on the left side, fluid on the left side of the lungs, and a bruised right knee.

Three employees were changing out a belt on a residual cooling fan when the injured employee's middle finger got caught between the belt and pulley. The employee sustained a fingertip amputation.

On November 11, 2024, an employee was offloading polyethylene pipe from a truck. The pipe was being moved along free-spinning rollers. The employee's pants got caught on a roller causing them to trip and fall onto a pipe. The employee sustained a puncture wound to their leg requiring hospitalization.

An employee was working on a compressed natural gas trailer gauge when a pressure release struck the employee's chest and forced the employee into a cement post. The employee's back was fractured.

An employee fell from a dock to ground level (less than 4 feet) and broke their tibia/knee.

An employee was on the ground working to close a trailer door. The door was caught by the wind and blew the employee backward. He landed on his back and sustained four fractured ribs, requiring hospitalization.

An employee was walking on top of boiler to close a valve. The employee fell off the boiler and landed on the floor, sustaining fractured ribs. The employee was hospitalized.

An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.

An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.