Monroe Truck Equipment, Inc.

An employee was struck and knocked down by a reversing forklift. The forklift wheels ran over their legs and broke a femur.

An employee was MIG welding a pintle plate onto the under chasse of a dump truck when welding sparks and slag ignited the back of his shirt, causing third, second, and first degree burns to his back.

An employee was supervising as two coworkers removed a plow from an overhead conveyor line. The plow was suspended from the conveyor by two j-hooks and two s-hooks. The coworkers were using a forklift to lower the plow to the ground. As the plow was being raised by the forklift, one of the coworkers guided it so that the mouth of the plow rested on the tines. The tines on the lift were wet due to rainy weather conditions, causing the plow to slide toward the end of the tines and fall off the forklift onto the ground. During its descent, the plow struck the employee on the right side of his body and sent him backwards into a hook rack, fracturing his ribs, shoulder blade, and T-12 vertebra.

An employee was using a robotic welder to lift a heavy pan of metal parts when he experienced a hernia that required surgery and overnight hospitalization.

An employee received multiple burns to his upper body when the T-shirt underneath his welding shirt caught on fire while welding. He received second and third degree burns on his head, neck, back, and right arm. The T-shirt was flammable.

An employee was trying to move a pressure vessel when it fell over. A stud on the top of the vessel struck and gouged the employee's stomach.

An employee was standing a steel bar on its edge when the bar fell onto his left hand, resulting in a middle fingertip amputation.

An employee was unloading the dishwasher and dropped a glass, resulting in a left hand laceration that required hospitalization.

An employee was removing a jam from a blancher. As he went to remove the blade, he dropped it, lacerating his leg.

An employee was mounting a TV when they dropped it. The employee suffered a partial amputation of the left index finger.

An employee was walking on a dock plate to open the door for the next trailer. He tripped on a cargo strap that was laying on the dock and fell. The employee sustained a fractured right hip, requiring hospitalization and surgery.

On September 18, 2025, an employee was rolling a stack of two steel racks containing automobile bumpers when the top rack dropped, pinching their right little finger. The employee suffered a partial amputation.

An employee spent about 4 1/2 hours working outdoors, servicing a boom lift on a truck. He was hospitalized with heat stress.

An employee was exiting an ambulance when his foot slipped, causing him to hit either the portable aluminum step or the concrete floor. He suffered a broken left elbow.

Two employees were sliding a 200-pound steel mounting plate off a worktable onto the forks of a forklift. They slid the plate until it was half on the table and half on the forklift, and were making an adjustment to get the plate fully on the forklift when the plate pinched one employee's left ring finger. He suffered a partial amputation to the fingertip.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.