Monroe Truck Equipment Inc.

An employee was struck and knocked down by a reversing forklift. The forklift wheels ran over their legs and broke a femur.

An employee was placing a part on a jig for welding when the part slipped out of his hand and crushed his left middle fingertip, resulting in an amputation.

An employee was MIG welding a pintle plate onto the under chasse of a dump truck when welding sparks and slag ignited the back of his shirt, causing third, second, and first degree burns to his back.

An employee was supervising as two coworkers removed a plow from an overhead conveyor line. The plow was suspended from the conveyor by two j-hooks and two s-hooks. The coworkers were using a forklift to lower the plow to the ground. As the plow was being raised by the forklift, one of the coworkers guided it so that the mouth of the plow rested on the tines. The tines on the lift were wet due to rainy weather conditions, causing the plow to slide toward the end of the tines and fall off the forklift onto the ground. During its descent, the plow struck the employee on the right side of his body and sent him backwards into a hook rack, fracturing his ribs, shoulder blade, and T-12 vertebra.

An employee received multiple burns to his upper body when the T-shirt underneath his welding shirt caught on fire while welding. He received second and third degree burns on his head, neck, back, and right arm. The T-shirt was flammable.

An employee was lifting a motor and reaching to place it on a machine when they sustained a back injury. The employee was hospitalized.

On 12/22/2023, an employee was carrying bins filled with pasta to a refrigerator. As he lifted a 20-pound bin, he felt pain in his lower back. The employee sustained a herniated disc.

An employee was lifting a patient when they pulled a back muscle. She suffered back pain and spasms radiating into her leg with weakness and numbness. The employee's L3-L4 disc was herniated and she was hospitalized.

An employee was lifting boxes when they suffered a strained back, resulting in hospitalization.

An employee was lifting a bundle of insulation with a colleague when he felt severe pain in the right side of his lower back/hip region. The employee sustained a severe muscle injury.

An employee was walking down a hallway In front of offices when she tripped over a door mat and fell to the floor. The employee sustained a fractured left femur.

An employee was loading seats in the back of a bus. They were using their left hand to pull a seat conveyor from the rear of the bus and had their right hand on the rear of the conveyor. The seat platform folded down, pinching their right index finger between the platform and the conveyor. The employee sustained a partial traumatic transphalangeal amputation.

On April 8, 2025, an employee was wheeling a utility cart containing transport parts and was backing out of a door when the cart tipped onto the employee and they fell. The parts fell onto the employee, resulting in hospitalization with knee, foot, and back pain.

An employee was stepping from the cab of a truck onto a portable ladder when the ladder slid, causing the employee to fall to the concrete shop floor. The employee was hospitalized with fractures to their nose, left wrist, and right humerus.

An employee was struck by a the back of a forklift while standing on a stand-up tugger. The employee suffered four or five fractures to the leg.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.