Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee was clearing a jam in a T-nut insertion machine when it cycled, resulting in a left index fingertip amputation.

An employee was walking around a poly cart to attach the hitch to another cart when she tripped on a piece of nylon twine that was tied to the poly cart. The employee fell to the concrete floor and sustained a displaced femoral neck fracture of the left hip.

An employee was moving a cart. His little finger was caught between that cart and another, and he suffered an amputation.

An employee was changing the bit on a router. The machine was cycled and the bit struck the employee, causing a fracture and a puncture wound to the right foot. The router was not locked out at the time.

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

On April 17, 2025, at 3:20 p.m., an employee was cleaning a drawer machine by blowing down the machine with air. His left hand was struck by the rotary blade on the machine, resulting in amputation to the index fingertip. The machine was guarded at the time.

An employee was using a table saw. The saw blade amputated the employee's right index finger.

An employee was operating a table saw. While removing a scrap piece of wood, the blade partially amputated their left index fingertip.

An employee was unclogging the sawdust collection system on a gang saw when they sustained amputations to their left middle fingertip and right index fingertip from the spinning turbines in the chute.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.