Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at QubicaAMF Worldwide, LLC, 7412 Utica Boulevard, LOWVILLE, NEW YORK 13367
on — Amputations, affecting the fingertip(s).
Final narrative
An employee noticed a belt guard was off-center and was attempting to move the guard when his fingers wrapped around the back of the guard, coming into contact with the pinch point of the belt and pulley. His left index fingertip was amputated.
An employee was working on a cheek plate line making bowling pins. The employee tried to grab a falling bowling pin when a moving chain contacted their left hand, resulting in amputation of the ring finger down to the first knuckle.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339920)
An employee was operating a tapping machine. The rotating bit on the tapping arm caught his glove, and fractured his left little finger. He was hospitalized, requiring surgery.
An employee stepped from a scissor lift onto metal shelving. The shelving gave out and the employee fell approximately 4.5 feet to the ground. The employee sustained a concussion and a laceration to the scalp that required staples.
On November 26, 2024, at 3:08 p.m., an employee was exiting a building when wind pulled on the door and the employee lost their balance. The employee was hospitalized with fractured ribs and a head contusion.
An operator was removing a pipe from the forming machine. When the gate arm of the machine returned to its home position, it caught the end of the pipe, causing it to swing and strike the injured employee in the jaw. The injured employee sustained a fractured left jaw and neck injuries.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.