Diversified Control, Inc.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was operating a forklift to return a scrap hopper after dumping material. After the employee placed the hopper outside the aircraft hangar door, the employee noticed the hopper rolling toward the doors. The employee exited the forklift to stop the hopper and grabbed the top of the hopper. During this time, the forklift started rolling forward and struck the hopper, pinning the employee s right hand between the forklift mast and the hopper and resulting in hand fractures.

An employee left a vehicle and walked to the front of it, between it and another vehicle. He tripped and fell, landing on his left hip and breaking it.

An employee was leaving a meeting at a customer site. As they were descending an interior staircase, the employee lost their footing on the last step and fell forward, landing on both knees on the concrete floor. The employee sustained a bilateral patellar tendon tear.

On November 9, 2023, an employee was picking up cones and equipment from the roadway in a work zone when they were struck by a motor vehicle. The employee sustained a fractured right leg.

On September 26, 2023, an employee was performing maintenance on an X-ray detection machine at an airport. While the employee was descending from a conveyance system to a three-step ladder, they fell to the ground, resulting in a compound fracture and a dislocated left ankle.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.