Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Kodak Park, 200 Ridge Road West, ROCHESTER, NEW YORK 14652
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was setting up a machine and suffered a fingertip amputation when his finger was pinched between two moving parts of the machine.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 325992)
During a machine restring-up operation, the employee at the unwinder opened an access door in an elevated work platform to re-thread the machine and turned around. When he turned back, he stepped into the access opening and fell three feet. The employee's lower right leg was fractured.
An employee was installing a ramp weighing approximately 500 pounds from the sidewalk to the back of a trailer when his left ring finger became pinched between the ramp and the sidewalk, resulting in amputation.
A forklift driver got off a forklift to adjust a pallet. The top pallet of products fell, breaking the driver's leg. The driver was hospitalized and underwent surgery.
An employee was performing routine maintenance on a coating machine. A stuck idler roll sprung loose, jamming three of the employee's fingers between the idler roll and the frame of the machine. The employee's middle finger was injured.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.