Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Brittany Global Technologies Corporation, 1357 East Rodney French Boulevard, NEW BEDFORD, MASSACHUSETTS 02744
on — Fractures, affecting the lumbar region.
Final narrative
An employee was standing on a lift wearing his harness to remove a section of duct work. He took the bolts off from around the section of duct work and then lowered the lift. The section of duct work was supposed to lower with the lift, but when he looked back, he noticed that the duct work was not coming down. At this time, he used his upper body, shoulder area to loosen the section. The duct work then fell and pinned him underneath it. He suffered a lumbar fracture.
HospitalizedLumbar regionDucts
More severe injuries at Brittany Global Technologies Corporation
A worker was cleaning the chain of a tenter frame machine. A second worker was jogging the machine for the first worker. The first worker's right hand was caught in the machine resulting in the amputation of the index fingertip.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 313310)
An employee was operating an electric standing pallet jack and pulling an empty A-frame when the jack struck a guard rail. The employee fell from the lift to his right hip and elbow on the concrete floor, and was hospitalized with a fractured hip.
An employee was clearing yarn that had wrapped around a gear-driven conveyor belt when his left arm got pulled between the belt and a roller. The employee sustained a fractured arm, as well as lacerations and abrasions.
On November 5, 2024, an employee was working on a lamination line. He had removed a slot assembly from a coating station, placed it into a portable slot cleaning tank, and rolled the cart with the assembly out of the cleaning tank. He hit the door of the coating station, and the slot assembly fell from the cart and crushed his little finger. He suffered an amputation above the first knuckle.
An employee was working on the thermal bond production line when the laydown formation table became filled with fabric. The employee was cleaning the area when the machine restarted. The employee's hands were caught between a belt and a roller resulting in amputations to multiple fingers on both hands.
An employee was correcting a malfunction on a covering machine when their left hand was caught in a moving component and they sustained a left index fingertip amputation.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.