105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Milliken & Company

Struck by running powered equipment during maintenance, cleaning, testing · Fractures

Federal OSHA recorded a severe workplace injury at Milliken & Company, 2410 Georgia Highway 32 West, NICHOLLS, GEORGIA 31554 on — Fractures , affecting the Arm(s) unspecified.

An employee was clearing yarn that had wrapped around a gear-driven conveyor belt when his left arm got pulled between the belt and a roller. The employee sustained a fractured arm, as well as lacerations and abrasions.

Hospitalized Arm(s) unspecified Conveyors belt, slot, chain

MILLIKEN & COMPANY

On February 26, 2024, an employee tripped over a pallet and fell to the concrete ground. He suffered a broken hip.

Milliken & Company

An employee was cleaning out a dust collection system. The employee's flashlight fell into a chute leading to an auger system; as the employee was retrieving it, the rotating auger amputated his lower right arm.

Milliken & Company

An employee was in a warehouse, operating a powered industrial truck, when his left leg was caught between the truck and a support beam. The leg was amputated from the calf down.

Milliken & Company

An employee was troubleshooting the lack of tar movement going from a tank truck to a storage tank when the flex hose disconnected and sprayed him with hot tar. He suffered burns to his right foot, right leg, both arms, and face.

Milliken & Company

An employee was trimming excess yarn off of the package. The excess yarn became entangled in his hand and fell back through the guide slot in the guard as the employee was cutting it. After falling through the guide slot, the yarn began to wrap around the over feed, pulling his hand against the guard causing the amputation of the left thumb, a laceration on the left pinky finger, and crushing the left ring finger.

View Milliken & Company's full OSHA safety record →

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

CFL USA, LLC

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Lear Corporation

An employee was operating an electric standing pallet jack and pulling an empty A-frame when the jack struck a guard rail. The employee fell from the lift to his right hip and elbow on the concrete floor, and was hospitalized with a fractured hip.

Dimension-Polyant, Inc.

On November 5, 2024, an employee was working on a lamination line. He had removed a slot assembly from a coating station, placed it into a portable slot cleaning tank, and rolled the cart with the assembly out of the cleaning tank. He hit the door of the coating station, and the slot assembly fell from the cart and crushed his little finger. He suffered an amputation above the first knuckle.

Cerex Advanced Fabrics, Inc

An employee was working on the thermal bond production line when the laydown formation table became filled with fabric. The employee was cleaning the area when the machine restarted. The employee's hands were caught between a belt and a roller resulting in amputations to multiple fingers on both hands.

Tweave, LLC

An employee was correcting a malfunction on a covering machine when their left hand was caught in a moving component and they sustained a left index fingertip amputation.

Brittany Global Technologies

An employee was caught in a machine and suffered broken ribs and a collapsed lung.

GS II Building Products, Inc.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Alfa Insurance

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

EMORY UNIVERSITY HOSPITAL

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.