Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at KanPak LLC, 105 Horizon Park Drive, PENN YAN, NEW YORK 14527
on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
While working on a sterilizer, an employee opened the damper door and came into contact with steam, suffering burns to the hands and face. The employee was hospitalized.
HospitalizedMultiple body parts, n.e.c.Steam, vapors-nonchemical
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 311511)
An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.
An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.
An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.
An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.