Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Kemps LLC Cedarburg Dairy Eastern Div., W55 N155 McKinley Blvd., CEDARBURG, WISCONSIN 53012
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.
Amputation Finger or thumb tip(s), nail(s) Dairy and milk processing machinery
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 311511)
An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.
An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.
An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.
An employee was making an adjustment to the resin flow on a blow mold machine when his wrench slipped. As he reached for the wrench, the jug molds closed on his right index finger. The employee's finger was amputated.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.