Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Luvata Waterbury, Inc., 2121 Thomaston Avenue, WATERBURY, CONNECTICUT 06704
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was operating a die stringer machine when his right hand entered the area between the die holder and the capstan. A wire then pulled the employee's middle fingertip, resulting in an amputation. The area between the die holder and the capstan was unguarded at the time of the incident.
HospitalizedAmputationFingertip(s)Metal, woodworking, and special material machinery, n.e.c.
An employee was using a gantry crane to move a copper cylinder across a room. As the employee went to stop the cylinder from swaying, the cylinder shifted on its holder and the employee's left little fingertip was crushed between the metal cylinder and the support at the bottom, resulting in a fingertip amputation.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332618)
An employee was driving a powered industrial truck (PIT) carrying a nesting sheave on the back counterweight of the PIT. He was holding the sheave when the PIT struck a pothole in the floor, causing the sheave to roll forward and crush his right index fingertip against the back of the PIT seat frame. The employee's fingertip was amputated, requiring hospitalization and surgery.
An employee was building slings. They were placing wire rope in a pneumatic vise when their right index finger was caught between the vise and the wire rope, resulting in a fracture that required hospitalization and surgery.
At about 7:15 a.m. on August 28, 2025, an employee was using a construction compactor to stabilize the dirt of a dam that had just been built. The dirt gave way underneath the compactor, which tipped on its left side. The employee fell out and was crushed and pinned between the compactor and the dirt. He was hospitalized, having suffered a broken sternum and broken ribs on both sides, as well as a laceration to the left leg by the ankle joint.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.