Hilite Industries Automotive, LP

An employee was looking at the orientation of a sprocket on a rotary machine when his right arm was trapped by a fixture on the machine. He suffered a cut/contusion/bruise on the inside of his arm above and below the elbow, requiring hospitalization.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was pushing automotive suspension material using a material rack. The material started to shift and caught the employee's right little finger, crushing it. The employee suffered an amputation to the finger. The finger was re-attached.

An employee was assembling the gearbox of a lower unit (of a boat motor). They used a handheld electric drill to power the lower unit's gears and inspect the assembly. A gear was out of tolerance, so the employee placed sandpaper in the gearbox to remove any burrs or other material. The employee activated the drill and their left middle finger contacted a nip point between the gears in the unit, resulting in a fingertip amputation.

An employee was reaching for a label and stepped onto a metal piece along rollers and slipped. His leg went down into a gap between the machines and contacted the metal in the gap between the rollers. The employee was hospitalized with the avulsion of skin on his left shin between the ankle and knee, as well as injuries to muscle and ligament.

On June 10, 2025, an employee was driving a forklift west when they were struck by another forklift driving south. The suffered a puncture wound on the right calf.

An employee had just moved a large coil of steel next to another coil on a rack using an overhead crane. They unhooked one side of the sling and held onto it with their right middle finger. As they were raising the crane back up, the sling hung up under the coil, building tension; once it released, it quickly jerked the other side of the sling through the coils along with the last joint of the employee's right middle finger. The finger was amputated to that joint.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.