Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Elkhart Products Corporation, 3265 Highway 71 South, FAYETTEVILLE, ARKANSAS 72701
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was manufacturing copper pipe fittings using a hydraulic press when a fitting fell into the machine. The employee was attempting to retrieve the fitting when the die came down on the employee's left index finger, amputating it at the first knuckle.
An employee was operating a hydraulic press, loading pre-cut tubes of copper into a feeder when the die closed on their right hand. The employee's right second, third, and forth fingers were amputated at the second knuckle.
An employee was doing maintenance work on a press machine. The machine was homed so that the employee could clear a piece of copper from the machine's die; the die closed and amputated the employee's left ring finger, as well as damaging his middle and index fingers and his thumb.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 332913)
An employee was on a ladder four feet above the ground to install insulation. The ladder began to slide and the employee jumped to the shop floor, breaking his left tibia and fibula at the ankle. He was hospitalized, requiring surgery.
An employee was replacing a rubber pad on the cylinder of a test station. Their right index finger was caught between a hydrant and a pneumatic cylinder of the test machine resulting in amputation of the fingertip.
An employee was driving a pallet jack. As they went to turn down an aisle, their foot was pinned against the pallet racking, resulting in a foot injury and laceration.
An employee was operating a hydraulic press, loading pre-cut tubes of copper into a feeder when the die closed on their right hand. The employee's right second, third, and forth fingers were amputated at the second knuckle.
An employee was conducting grinding operations on a cast iron pipe using a portable grinder. The grinder kicked back and struck the employee's right wrist and knee. The employee sustained a laceration to his right knee and a cut to his right wrist that injured an artery and a tendon.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.