105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Helmerich & Payne International Drilling Co.

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Helmerich & Payne International Drilling Co., Trailand A Unit 3904 WB (H&P Rig 622), MIDLAND, TEXAS 79701 on — Amputations, affecting the fingertip(s).

A crew was in the process of putting a sub-spreader beam in place so that they could raise the rig floor. An employee's hand was resting on the spreader beam when the derrick hand pulled the beam from its stowed position. The employee's small finger was then caught between the spreader beam and the sub leg, amputating his fingertip.

Amputation Fingertip(s) Oil drilling rigs and machinery

Helmerich & Payne International Drilling Co.

An employee was in the basket of an aerial work platform pressure washing a shaker roof. While rotating the wand, an unexpected pressure release occurred. The wand was one inch from his right knee and injected him with fluid at 2,900 PSI.

Helmerich & Payne International Drilling Co.

Employees were rigging down. The injured employee was hooking up a flow line to a manifold. When he stepped back, he fell through a gap in the floor of the shaker, landing on his head on the ground about 12 feet below. He suffered multiple skull fractures and bleeding on the brain and was hospitalized.

Helmerich & Payne International Drilling Co.

An employee was guiding the first joint of casing into a conductor in a cellar area. A centralizer (secured around a pipe) was pushed through the rotary table. The centralizer slid down the pipe and caught the employee's left ring finger against the collar on the casing. The employee's left ring fingertip was amputated.

Helmerich & Payne International Drilling Co.

An employee was attaching a tong to a pipe when his left leg was caught in the tong pull line and the drill string, resulting in a left leg amputation.

Helmerich & Payne International Drilling Co.

An employee was lowering a blowout preventer (BOP) into position. He placed his hand on top of a stud on the BOP flange while the BOP was being lowered. The stud became hung up and bottomed out on the pipe ram body, smashing his left hand. His left middle finger and knuckle were crushed and required surgery. Impact gloves were worn at the time of the incident.

View Helmerich & Payne International Drilling Co.'s full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Hall Drilling, LLC

An employee was stepping down off a 6-inch containment platform to finish loading his truck, when his right ankle rolled. The employee sustained a fractured tibia and fibula at the right ankle and required surgery.

C. Miller Drilling Inc

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

Amercian Well Service Llp

An employee was working to remove a stuck fish tool from a drill shoe. Their thumb was struck by a hammer, resulting in amputation.

Axis Energy Services

An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.

ROBINSON DRILLING OF TEXAS, LTD

An employee was rigging up a location. He was using an Allen wrench to free up rotation and start the drawworks engine manually. The engine rotated and his left little finger became caught between the Allen wrench and the engine. The employee sustained an amputation to his little finger and fractures to his wrist.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.