Struck by swinging or slipping object, other than handheld, n.e.c. · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at EMF, Inc, 124 South Imperial St, MERRITT ISLAND, FLORIDA 32952
on — Cuts, lacerations, affecting the scalp.
Final narrative
A crane was used to tilt a steel cradle, which was attached on either side with slings. The slings were attached to clamps and the clamps were attached to the cradle. As the cradle was tilted, one of the clamps came loose and swung in the air, striking the back of an employee's head. He sustained a head laceration, requiring hospitalization and stitches. A hard hat was not worn at the time.
A crew was pulling a 4-inch plastic gas pipe off a reel and straightening it for installation. The injured employee stepped up on the trailer to cut the last band holding the pipe in the coil on the reel. As he turned to step off the trailer, the end of the pipe rotated and sprung out of the cage surrounding the coil, striking the employee on the side of the head and knocking him off of the trailer into the roadway. The employee suffered head trauma that required hospitalization.
An employee and a co-worker were performing a pick inside a clear well. They rigged the skid pan that was full of broken concrete. When lifting, the load began to swing toward a wall. The employee tried to stop the skid pan from swinging and was struck by the pan, resulting in fractures to their left hip and wrist.
The employee had just completed refueling a lattice crane that was breaking up material and was winding the fuel hose back into the fuel truck when he was struck by the catwalk/stairs of the crane. The employee was hospitalized with a laceration to his backside, possible internal bleeding, and a broken hip.
An employee was fusing 10-inch black rubber utility pipes together using a pipe fusion machine and could not get the pipes to set correctly. The employee used a nylon strap attached to an excavator to lift one side of a pipe off a steel plate. As his hand was between two pipes, the pipes came back together, partially amputating two of his fingers.
An employee was lifting four bags of a lime blend weighing approximately 10,000 pounds using a crane. The load swung and pinned the employee against a structural I-beam, resulting in fractures to the hip and pelvis.
More severe injuries in this industry (NAICS 332999)
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
Two employees were running a CNC folder machine. The injured employee went to adjust the metal and the machine came down, crushing her forearms. Her left arm was fractured and both arms required stitches.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.