TULSA, OKLAHOMA—
AAON INC.
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at AAON INC., 2425 S. YUKON AVE., TULSA, OKLAHOMA 74107 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was placing sheet metal panels onto a base form when his left middle finger was pinched between the panels, resulting in a surgical amputation.
More severe injuries at AAON INC.
TULSA, OKLAHOMA—
AAON INC.
An employee had staged a forklift and was preparing to release a latch from the attached bin. The latch did not allow the bin to tilt forward. The employee manually pushed the bin while holding the latch open. When the bin bounced back, the employee's left middle finger was crushed, resulting in partial amputation via surgery.
LONGVIEW, TEXAS—
AAON, Inc.
An employee was moving sheet metal onto a pallet and sustained a hernia.
TULSA, OKLAHOMA—
AAON INC.
An employee was depositing a piece of sheet of metal into the container of a forklift when the employee was struck by a second forklift. The back tire ran over the employee's left foot and broke it. The employee was hospitalized, requiring surgery.
TULSA, OKLAHOMA—
AAON INC.
The injured employee walked out from behind a set of shelves and was struck by a pallet being moved by a forklift. The pallet struck the employee s ankles, causing her to trip and hit her head on either the forklift mast or the pallet. The employee sustained lacerations across the back of her head.
LONGVIEW, TEXAS—
AAON, Inc.
An employee was operating a forklift and dumping scrap metal into a recycling bin. He was picking up metal scraps when a metal pallet slid off the forks of the forklift and caught his right little finger against the scrap bin. The employee's finger was partially amputated.
View AAON INC.'s full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 333415)
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
DANVILLE, ILLINOIS—
American Event Services LLC
An employee was holding a piece of rubber while it was being cut on a band saw. The saw blade amputated his right middle fingertip without bone loss.
GILMER, TEXAS—
Coil Specialist, Inc.
An employee was observing expansion rods on a coil expander going into a coil to ensure copper stubs weren't being bent. His left hand was caught between the locking block and locking block clamp on the power press machine, resulting in partial amputation of his left little finger from the distal interphalangeal joint.
DANVILLE, ILLINOIS—
American Event Services LLC
An employee was setting up a press brake and rolling over a die when the tip of their left little finger was caught between the horizontal working surface of the press brake and die. The employee sustained partial amputation of their fingertip.
WICHITA, KANSAS—
JC Residential and Light Commercial LLC
An employee was working to remove an access panel to begin performing maintenance on a machine. The set pins on the bottom of the panel were broken. The bottom kicked out and fell, striking the employee's left foot and resulting in a fracture to the big toe.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.