TULSA, OKLAHOMA—
Crossland Construction Company Inc
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Crossland Construction Company Inc, 951 W. 36th St. N, TULSA, OKLAHOMA 74127 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was helping to place a pin into a shoe bolt on a frame that was being raised and lowered by a forklift when material slipped and smashed the employee's left middle finger. The finger had to be surgically amputated.
More severe injuries at Crossland Construction Company Inc
NORMAN, OKLAHOMA—
Crossland Construction Company, Inc.
An employee was removing a spandrel beam from a scissor lift. The employee lost hold of the spandrel beam and it fell on their left hand amputating the ring fingertip.
TULSA, OKLAHOMA—
CROSSLAND CONSTRUCTION COMPANY, INC.
An employee was operating a wire brush handheld grinder to smooth out concrete. The grinder hit the side of a stair and kicked back, hitting the employee's left leg and causing a 2" deep and 4" wide laceration on his thigh.
OWASSO, OKLAHOMA—
Crossland Construction Company, Inc.
An employee fell 18-20 feet through an uncovered hole in the roof while helping to install HVAC equipment. The employee was hospitalized for a facial fracture.
BENTONVILLE, ARKANSAS—
Crossland Construction Company, Inc.
An employee was cleaning a spray gun. He had mineral spirits in the gun and was adjusting the spray tip when the gun shot the mineral spirits into the skin on one of his fingers. The finger was surgically removed and the employee was hospitalized.
ROGERS, ARKANSAS—
Crossland Construction Company, Inc.
An employee was installing guttering at a commercial construction site when he fell approximately 28 feet to the ground. He was hospitalized with a fractured vertebra and required surgery.
View Crossland Construction Company Inc's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 236220)
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
VICKSBURG, MISSISSIPPI—
Hobby Lobby Stores, Inc.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
JACKSONVILLE, FLORIDA—
Cross Management Corp.
An employee was installing insulation in a wall when she tripped on a hole (12" deep) and fell, hitting her head on the concrete floor. The employee sustained fractures to her leg and wrist, and lacerations to her head. The employee was hospitalized.
POST FALLS, IDAHO—
STEEL STRUCTURES AMERICA INC
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.
HAZLEHURST, GEORGIA—
Trejo Concrete & Steel, LLC
An employee was operating a power drill when it slipped. The drill bit punctured the employee's hand and they were hospitalized.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.